TLC4501IDG4 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. A Tube case is used for delivering the op amp. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 10μV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . You can run this op amp ic on 1mA . It is recommended to keep the voltage gain at 120dB at all times. There are 1 circuits on op amps. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. As the name implies, LinEPIC?, Self-Cal? refers to the series of the buffer op amp.
TLC4501IDG4 Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
TLC4501IDG4 Applications
There are a lot of Texas Instruments TLC4501IDG4 Instrumentational OP Amps applications.
- Signal operation
- High/low-pass filter circuit
- Proportional counter tubes
- Navigation
- Weak signal detection
- Communication
- Portable docking station
- Fission chambers
- Active probe
- Biopotential
