TLC393QDRQ1 Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .The comparator has a type MOS, Open-Drain output.The chip is packaged with Cut Tape (CT) .As you can see, the comparator has8 terminals.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.The device is equipped with 8 pins.In general, mounting type Surface Mount is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator has a pin count of 8 .In case you are looking for more pin-to-pin solutions, you may want to search TLC393 .There is a quiescent current of 90μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 40μA when using the device.If the current supply exceeds 40μA , the comparator might be damaged.There is sufficient power to run the device from 5V power supplies.Input current to the device is limited to 5pA .This part is from the Automotive, AEC-Q100, LinCMOS? comparator series.For normal operation, the operating supply voltage must be 5V .With a TR package, this device is designed for general use (usually in ADC circuits).
TLC393QDRQ1 Features
MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 90μA
TLC393QDRQ1 Applications
There are a lot of Texas Instruments TLC393QDRQ1 linear comparators applications.
- Building automation
- Zero-Crossing Detectors
- General Purpose Low Voltage Applications
- Appliances
- Portable Battery Monitoring
- High-Speed Sampling Circuits
- Mobile Phones
- Automotive
- Window Comparators, Multivibrators
- High-Speed Differential Line Receiver
