TLC374CD Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a CMOS, MOS, Open-Drain, TTL output type for this comparator.Electronic comparator is shipped by Tube .The comparator has a total of 14 terminals.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as Differential .Electronic comparator has 14 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 14 .You can find more pin-to-pin solutions by searching TLC374 .As a result, this comparator displays a quiescent current of 800μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 600μA when using the device.A supply current exceeding 150μA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.A comparator part from the LinCMOS™ series is used in this part.Comparator electronics is necessary to have an operating supply voltage of 15V for normal operation.
TLC374CD Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 800μA
TLC374CD Applications
There are a lot of Texas Instruments
TLC374CD linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
