TLC372MDR Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.The chip is packaged with Tape & Reel (TR) .The device is designed with 8 terminations.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a Differential chip.There are a total of 2 elements in it.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLC372 .A quiescent current of 400μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 300μA supply current.If the current supply exceeds 300μA , the comparator might be damaged.This device requires 5V power supplies to operate.Input current to the device cannot exceed 5pA .The part is based on LinCMOS™ .Comparator electronics is acceptable to pack the device by TR .
TLC372MDR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 400μA
TLC372MDR Applications
There are a lot of Texas Instruments
TLC372MDR linear comparators applications.
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Limit Comparators
