TLC3704MJ Overview
In order to make transportation easier, it is packaged in CDIP .A comparator with an output type of PUSH-PULL is being used.We ship the part through Rail/Tube .As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A total of 14 pins are included.The comparator consists of 14 pins.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 80μA .The device can be run with 5V power supplies.In general, temperatures higher than 125°C are not recommended.Comparator electronics will not be able to function at temperatures below -55°C .A comparator's maximum supply voltage is 16V volts.Using a voltage as low as 4V is possible for this comparator.For the output quality to be maintained, 4 channels work together.There is essentially a very high gain COMPARATOR amplifier in the comparator.For normal operation, there should be 5V operating supply voltage applied.
TLC3704MJ Features
PUSH-PULL output capability
COMPARATOR amplifier
TLC3704MJ Applications
There are a lot of Texas Instruments
TLC3704MJ linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
