TLC3704MDR Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type CMOS, Push-Pull, TTL is used for this comparator.This device is designed in Tape & Reel (TR) case.Electronic comparator is possible to find the 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.This element consists of 4 elements in total.The device contains 14 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -55°C~125°C .14 pins are present on the comparator.You may wish to search TLC3704 for more solutions that address your specific needs.The comparator presents a quiescent current of 175μA volts.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 80μA .The compartator could be damaged if the current supply exceeds 80μA .In order to operate the device, 5V power supplies are sufficient.Electronic comparator is possible to input up to 5pA current into the device.Comparator electronics comes from the series of LinCMOS™ comparator parts.A normal operation requires a voltage of 5V .The device is packaged in TR and is often used in ADC circuits.
TLC3704MDR Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 175μA
TLC3704MDR Applications
There are a lot of Texas Instruments
TLC3704MDR linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
