TLC3702MFKB Overview
Packaged in a SOIC case, the buffer op amp is ready to use. An op amp ic of the COMPARATOR type. The op amp is delivered to you in a Rail/Tube case. There is a growing number of terminations approaching the number of 20. The pins on this board total to 20 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Comparator-type of devices. A total of 20 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs PUSH-PULL signals. For the buffer op amp to operate properly, it must be above the temperature of -55°C degrees Celsius. No temperature greater than 125°C should be used. The operating supply voltage of the buffer op amp is rated at 5V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 16V. A high supply voltage of more than 4V is recommended for the instrumentation amplifier's supply voltage.
TLC3702MFKB Features
20 Pins
supply voltage of 5V
Output Type: PUSH-PULL
TLC3702MFKB Applications
There are a lot of Texas Instruments
TLC3702MFKB Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
