TLC354CPWR Overview
In order to make transportation easier, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of CMOS, MOS, Open-Drain, TTL is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as Differential .A total of 4 elements can be found in it.A total of 14 pins are included.A Surface Mount mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 14 pins.Alternatively, you may search for TLC354 to find more pin-to-pin solutions for your specific needs.There is 800μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 150μA .A current supply greater than 150μA may cause the comparator to malfunction.The device can be run with 5V power supplies.Comparator electronics is part of the LinCMOS™ comparator series.The device is acceptable to pack by TR .
TLC354CPWR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 800μA
TLC354CPWR Applications
There are a lot of Texas Instruments
TLC354CPWR linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
