TLC27L4ACDRG4 Overview
In the package, you will find a SOIC-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Tape and Reel case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 10V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 14 pins on it. Op amp rates 5mV as input offset voltage. Using an 57μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 114.32dB for the time being. To operate this buffer amplifier, the temperature must not be lower than 0°C. A temperature greater than 70°C should not be used for the operation of buffer amplifier. 4 elements make up the design of this buffer amplifier. This electric component can work from a voltage of under 16V as far as supply voltage is concerned. A voltage of 3V or higher is recommended for the linear amplifier's supply voltage.
TLC27L4ACDRG4 Features
14 Pins
supply voltage of 10V
114.32dB voltage gain
TLC27L4ACDRG4 Applications
There are a lot of Texas Instruments
TLC27L4ACDRG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
