TLC27L1CPE4 Overview
It is packaged in an P-case that protects the operational amplifiers from damage. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1.1mV for input offset voltage. A supply current of 14μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 114.32dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. An buffer amplifier is packed in a TUBE-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 16V, which is suitable. Keeping the linear amplifier's supply voltage above 3V is recommended.
TLC27L1CPE4 Features
8 Pins
supply voltage of 5V
114.32dB voltage gain
TLC27L1CPE4 Applications
There are a lot of Texas Instruments
TLC27L1CPE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
