TLC279CDR Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 14 pins that make up the linear amplifier. The input offset voltage is 900μV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using an 3.8mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 87.23dB is the best course of action. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4. The instrumentation amplifier is packed in the form of TR. The LinCMOS? represents the op amp's series number.
TLC279CDR Features
14 Pins
supply voltage of 5V
87.23dB voltage gain
TLC279CDR Applications
There are a lot of Texas Instruments TLC279CDR Instrumentational OP Amps applications.
- Fission chambers
- Inverse/same-phase proportional circuit
- Proportional counter tubes
- Laptop
- Band-pass filter
- High speed sample
- Scintillation detectors
- Biopotential
- Band-stop filter
- Home audio systems
