TLC274CPWRG4 Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 14 terminations over the past year. In this case, there are 14 pins on the board. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 14 pins. Op amp ic rates 10mV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . Using a supply current of 3.8mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 87.23dB. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer. For the packing of the instrumentation amplifier, TR is adopted. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLC274CPWRG4 Features
14 Pins
supply voltage of 5V
87.23dB voltage gain
TLC274CPWRG4 Applications
There are a lot of Texas Instruments TLC274CPWRG4 Instrumentational OP Amps applications.
- High gain DC amplifier
- Subtraction operation circuits
- Television
- High/low-pass filter circuit
- Commercial audio systems
- Broadcasting
- Semiconductor detectors
- Automotive sensors
- Differentiator circuits
- Portable media players
