TLC274CDBRG4 Overview
There is a SSOP case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Tape and Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 14 mark. The total number of pins on linear amplifier is 14. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 14 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 10mV. It is possible to operate this buffer amplifier from a supply current of 3.8mA . 87.23dB should be the voltage gain. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. At temperatures greater than 70°C, Instrumentation amplifier should not be used. There are 4 elements in total in this linear amplifier. The electrical part is capable of being powered by a voltage of under 16V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 3V.
TLC274CDBRG4 Features
14 Pins
supply voltage of 5V
87.23dB voltage gain
TLC274CDBRG4 Applications
There are a lot of Texas Instruments
TLC274CDBRG4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
