TLC274BCDRG4 Overview
Packaging for the buffer amplifier is in the form of a SOIC case. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape and Reel case. There have been a total of 14 terminations over the past year. There are a total of 14 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 2mV. An 3.8mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. The temperature should not be lower than -40°C for operational amplifier ics to operate. No temperature greater than 85°C should be used. It is possible to count 4 elements on this buffer amplifier. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 16V. Keeping the linear amplifier's supply voltage above 3V is recommended.
TLC274BCDRG4 Features
14 Pins
supply voltage of 5V
87.23dB voltage gain
TLC274BCDRG4 Applications
There are a lot of Texas Instruments TLC274BCDRG4 Instrumentational OP Amps applications.
- Laptop
- Test equipment
- Thermocouples
- Cinema or auditorium audio system
- Broadcasting
- Precision measurement
- Image computer boards
- Proportional counter tubes
- Communication
- single/dual op amp sum and difference circuits
