TLC2654AIPE4 Overview
It is packaged in an P-case that protects the operational amplifiers from damage. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 10μV. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.5mA and 10 . There should be no change in the voltage gain at 155dB. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. It is recommended that op amp be used at temperatures below 85°C. The op amp is rated for an operating supply voltage of 1. The operating supply voltage of the buffer op amp is rated at 8V. TUBE is adopted to pack the instrumentation amplifier. I would like to point out that this electrical component is capable of working from a voltage below 16V as far as the power supply is concerned. Keeping the linear amplifier's supply voltage above 4.6V is recommended. It is recommended that you conduct this electronic part using the dual supply voltage of 8V.
TLC2654AIPE4 Features
8 Pins
supply voltage of 5V
155dB voltage gain
TLC2654AIPE4 Applications
There are a lot of Texas Instruments TLC2654AIPE4 Instrumentational OP Amps applications.
- Power control
- ECG equipment
- Oscilloscopes
- Division circuits
- Inverse/same-phase proportional circuit
- High speed sample
- Band-pass filter
- Band-stop filter
- Exponential operation circuits
- Video computer boards
