TLC25M4BCNE4 Overview
There is a N case package that contains the instrumentation amplifiers. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 14 pins are located on the operational amplifiers. The input offset voltage is 260μV. The buffer amplifier is capable of operating from a supply current of 570μA . It is recommended to keep the voltage gain at 104.61dB at all times. On the buffer amps, there are 4 channels that can be used. For this linear amplifier to work, the temperature should not be below 0°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 70°C. The operating supply voltage of the buffer op amp is rated at 8V. Under 16V is the minimum supply voltage for this electric component. Over 1.4V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 8V.
TLC25M4BCNE4 Features
14 Pins
supply voltage of 5V
104.61dB voltage gain
TLC25M4BCNE4 Applications
There are a lot of Texas Instruments
TLC25M4BCNE4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
