TLC2272QPWRQ1 Overview
Packaged in a 8-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. There is an input offset voltage of 2.5mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 2.4mA, this op amp ic can operate. 104.86dB should remain the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 8V. The instrumentation amplifier is packed in the form of TR. Instrumentation amplifiers are numbered by their Automotive, AEC-Q100, LinCMOS? series.
TLC2272QPWRQ1 Features
8 Pins
supply voltage of 5V
104.86dB voltage gain
Output Type: Rail-to-Rail
TLC2272QPWRQ1 Applications
There are a lot of Texas Instruments TLC2272QPWRQ1 Instrumentational OP Amps applications.
- PDA
- Commercial audio systems
- Signal filtering
- Weak signal detection
- Inverse/same-phase proportional circuit
- Signal amplification
- Logarithmic operation circuits
- Portable electronic products powered by batteries
- Signal operation
- Precision measurement
