TLC2272CPWRG4 Overview
There is a TSSOP case package that contains the instrumentation amplifiers. This is a OPERATIONAL AMPLIFIER type op amp. Linear amplifier is delivered in a Tape and Reel case. The number of terminations approaches 8. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 2.5mV voltage. An 2.4mA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 104.86dB at all times. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. It is recommended that op amp be used at temperatures below 125°C. It is possible to count 2 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 8V voltage. Under 16V is the minimum supply voltage for this electric component. To keep the buffer amps' supply voltage higher than 4.4V. It is recommended that you conduct this electronic part using the dual supply voltage of 8V.
TLC2272CPWRG4 Features
8 Pins
supply voltage of 5V
104.86dB voltage gain
TLC2272CPWRG4 Applications
There are a lot of Texas Instruments TLC2272CPWRG4 Instrumentational OP Amps applications.
- Blood pressure sensors
- Polarized electrodes
- Vehicle electronics
- Power generator
- Communication device
- Addition operation circuits
- single/dual op amp sum and difference circuits
- Computer workstations
- Video amplifiers
- Logarithmic operation circuits
