TLC2252CPE4 Overview
It is packaged in an P-case that protects the operational amplifiers from damage. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1.5mV for input offset voltage. A supply current of 80μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 124.61dB. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. It is important to keep in mind that the power supply voltage of this electric component is below 16V, which is suitable. Keeping the linear amplifier's supply voltage above 4.4V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 8V volts.
TLC2252CPE4 Features
8 Pins
supply voltage of 5V
124.61dB voltage gain
TLC2252CPE4 Applications
There are a lot of Texas Instruments
TLC2252CPE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
