TLC083IDGQG4 Overview
The linear amplifier is packaged in a SOP case which makes it easy for the consumer to handle. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. There have been a total of 10 terminations over the past year. In this case, there are 10 pins on the board. Please take in mind that op amp should be run at 5V. 10 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 390μV. You can run this op amp ic on 1.9mA . Op amp is a member of the 120dB's 120dB family. Instrumentation amplifier has 2 channels on it. Using this buffer op amp requires a temperature of at least -40°C. It is recommended that op amp be used at temperatures below 125°C. The operating supply voltage of instrumentation amplifier is rated 8V voltage. To pack the operational amplifier ics, TUBE is adopted as the packing method. With regard tp supply voltage, op amp is used under 16V. The linear amplifier's supply voltage should be higher than 4.5V. There should be a dual supply voltage of 8V for you to conduct this electrical part.
TLC083IDGQG4 Features
10 Pins
supply voltage of 5V
120dB voltage gain
TLC083IDGQG4 Applications
There are a lot of Texas Instruments
TLC083IDGQG4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
