TLC074IPWPG4 Overview
There is a HTSSOP EP case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. The number of terminations is approaching the 20 mark. The total number of pins on linear amplifier is 20. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 20 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 390μV. It is possible to operate this buffer amplifier from a supply current of 2.1mA . 120dB should be the voltage gain. Op amp ic has 4 channels. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 125°C, Instrumentation amplifier should not be used. The operating supply voltage of the buffer op amp is rated at 8V. For the packing of the instrumentation amplifier, TUBE is adopted. The electrical part is capable of being powered by a voltage of under 16V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 4.5V. As a general rule, you should conduct this electronic component under dual supply voltages of 8V volts.
TLC074IPWPG4 Features
20 Pins
supply voltage of 5V
120dB voltage gain
TLC074IPWPG4 Applications
There are a lot of Texas Instruments
TLC074IPWPG4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
