TLC073IDGQG4 Overview
There is a MSOP case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Instrumentation amplifier is delivered in a Rail/Tube case. During the past two weeks, there have been close to 10 terminations. In this case, there are 10 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 10 pins. In terms of input offset voltage, operational amplifier rates 1.9mV. Using a supply current of 2.1mA , this buffer op amp will be able to operate. It is a member of the 120dB's 120dB family. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 125°C. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of the buffer op amp is rated at 8V. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 16V, and this is an excellent feature. A voltage of 4.5V or higher is recommended for the linear amplifier's supply voltage. There should be a dual supply voltage of 8V for you to conduct this electrical part.
TLC073IDGQG4 Features
10 Pins
supply voltage of 5V
120dB voltage gain
TLC073IDGQG4 Applications
There are a lot of Texas Instruments TLC073IDGQG4 Instrumentational OP Amps applications.
- Tablets
- Semiconductor detectors
- Signal amplification
- Portable media players
- Band-stop filter
- Mobile phone
- Home audio systems
- PDA
- Division circuits
- High input resistance broadband
