Name: TLC071AIP
Brand: Texas Instruments
SKU: TLC071AIP
Price: 1.30000 USD
Availability: InStock

new-10%

TLC071AIP

Manufacturer part number:TLC071AIP

Manufacturer:Texas Instruments

Description:1 Channels 57mA per Channel 1.5pA 80 dB Instrumentational OP Amps 0.0007μA 8V 4.5V~16V ±2.25V~8V TLC071 8 Pins 8-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:TLC071AIP Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIMOS
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	TLC071
Pin Count	8
Operating Supply Voltage	8V
Number of Channels	1
Operating Supply Current	2.1mA
Nominal Supply Current	2.9mA
Power Dissipation	1.2W
Output Current	57mA
Slew Rate	19V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	80 dB
Current - Input Bias	1.5pA
Voltage - Supply, Single/Dual (±)	4.5V~16V ±2.25V~8V
Output Current per Channel	57mA
Input Offset Voltage (Vos)	1.4mV
Bandwidth	10MHz
Unity Gain BW-Nom	10000 kHz
Voltage Gain	120dB
Average Bias Current-Max (IIB)	0.0007μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	390μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	NO
Nominal Gain Bandwidth Product	10MHz
Max I/O Voltage	1.4mV
Input Offset Current-Max (IIO)	0.00005μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLC071AIP Product Details

TLC071AIP Overview

Op amp is packaged in 8-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 1.4mV for input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. An 2.1mA volt supply current is needed for this linear amplifier to operate. 120dB should remain the voltage gain. There are 1 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 8V voltage.