Welcome to Hotenda.com Online Store!

logo
userjoin
Home

TL7770-12CDWE4

TL7770-12CDWE4

TL7770-12CDWE4

Texas Instruments

5V16 Terminals 16-Pin TL7770 Voltage supervisor2 Channels Min 3.5V Max 18V

SOT-23

TL7770-12CDWE4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Surface MountYES
Number of Pins 16
Operating Temperature0°C~70°C TA
PackagingTube
JESD-609 Code e4
Pbfree Code no
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multi-Voltage Supervisor
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional FeaturePOWER ON RESET GENERATOR
Subcategory Power Management Circuits
Technology BIPOLAR
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TL7770
Output Complementary
Pin Count16
Number of Channels 2
Max Supply Voltage18V
Min Supply Voltage3.5V
Operating Supply Current 5mA
Max Supply Current 5mA
Adjustable Threshold NO
Quiescent Current5mA
Watchdog TimerNo
Reset Active High/Active Low
Voltage - Threshold 12V Adj
Number of Voltages Monitored2
Reset Timeout 270 ns Typical Propagation Delay
Threshold Voltage +10.9V
Undervoltage Threshold10.68V
Length 10.3mm
Width 7.5mm
RoHS StatusROHS3 Compliant
Lead Free Contains Lead
In-Stock:1530 items

TL7770-12CDWE4 Product Details

TL7770-12CDWE4 Overview


A total of 16 terminals are used to mount this power management. Packaging is in the form of a Tube. Power management is possible to find a series of 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. In this IC management you will find 16-SOIC (0.295, 7.50mm Width) functions for you to refer to. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 5V supply voltage, the power management conducts. When a supply voltage of 2 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 16 pins on power management. 16 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 3.5V. The supply voltage (Vsup) should not exceed 18V volts in this IC power. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Complementary. As far as the supply current of the power management is concerned, it is 5mA. Power management is also possible to add other features such as POWER ON RESET GENERATOR to name a few. You can always use TL7770, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 5mA.

TL7770-12CDWE4 Features


Multi-Voltage Supervisor type
Minimum supply voltage of 3.5V
5mA operating supply current

TL7770-12CDWE4 Applications


There are a lot of Texas Instruments TL7770-12CDWE4 Voltage Supervisors applications.

  • Household appliances
  • Battery cars
  • Satellite navigation
  • Detection of phase sequence
  • Multi-voltage system
  • Transformer load monitoring equipment
  • Smart meter
  • Medical-specific insulation monitor
  • Efficient information transmission
  • Radio

Get Subscriber

Enter Your Email Address, Get the Latest News