TL7733BCDR Overview
As you can see, this power management is mounted through 8 terminals. Power management is packaged in a Cut Tape (CT) way. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 8. Pin count of the power management is 8. There should be a minimum voltage supply (Vsup) of 3.6V for this PMIC. This IC power should be powered by no more than 18V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Complementary. The supervisor's supply current is specified to 1.8mA. Among other features, IC power can be also taken advantage of [0], for instance. It is always advisable to use TL7733, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 3.5mA can be used.
TL7733BCDR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current
TL7733BCDR Applications
There are a lot of Texas Instruments TL7733BCDR Voltage Supervisors applications.
- Analog circuit
- Radio
- Transformer load monitoring equipment
- Military communications
- Medical-specific insulation monitor
- Dash board
- Personal computers
- Power communication system
- Precision measurement
- Electric heating appliances
