TL7700CPE4 Overview
It is mounted through 8 terminals on the power management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are PDIP functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3V. During operation, the power ic is supplied with a voltage of 1. Using Through Hole, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.8V. Voltage (Vsup) shouldn't exceed 40V volts in this PMIC. As far as the supply current of the power management is concerned, it is 600μA. The other features include, for example, [0], which is just one example. There is a requirement for 2/36V power to power this power management. The maximum supply temperature that PMIC chip can work with is 1mA.
TL7700CPE4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
600μA operating supply current
TL7700CPE4 Applications
There are a lot of Texas Instruments
TL7700CPE4 Voltage Supervisors applications.
- Power distribution systems of CCU
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
