TL714CDR Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type Push-Pull, TTL output on this device.The chip is packaged with Tape & Reel (TR) .The device is designed with 8 terminations.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a Differential chip.There are a total of 1 elements in it.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search TL714 .A quiescent current of 12mA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 12mA supply current.If the current supply exceeds 12mA , the comparator might be damaged.This device requires 5V power supplies to operate.The operating supply voltage for normal operation should be 5V .Comparator electronics is acceptable to pack the device by TR .
TL714CDR Features
Push-Pull, TTL output capability
Differential IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 12mA
TL714CDR Applications
There are a lot of Texas Instruments
TL714CDR linear comparators applications.
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Limit Comparators
