TL594IPW Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. For 2 outputs, the dc motor controller is appropriate. Tube solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). 7V~40V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. Using this switching controller, it is possible to switch at 1kHz~300kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Dead Time Control, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 16. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. A search for "TL594" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 16. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the input voltage of the dc dc voltage regulator be 7V. Statistically, the DC regulator outputs 40V voltage. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 45 %. Switching controller operates at a frequency of 300kHz.
TL594IPW Features
Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz
TL594IPW Applications
There are a lot of Texas Instruments TL594IPW DC to DC converter applications.
- Low output voltage switching power supply circuits
- Remotely powered electric motors
- Thermal power
- Digital display device
- Emergency lighting monitoring equipment
- Grinders
- Electric water heaters
- Adjustable voltage or current linear circuits
- Wind power
- Flexible manufacturing cells
