TL4242TDRJRQ1 Overview
To save board space, it uses the 8-WDFN Exposed Pad package. Using this LED driver, there are 1 outputs.Mounting is done according to the Surface Mount method.Linear emerges with high efficiency and reliability.It is possible for the led driver ic to operate normally at -40°C~105°C TA.In the 10kHz frequency range, it operates.In this case, the termination value is 8.To form its configuration, 8 pins are used.A voltage supply less than 4.5V could result in undetermined failures.The number of segments is estimated to be 3.It's mounted in Surface Mount.This LED driver has the part number TL4242.In this case, 42V is acceptable.A 16V volt output voltage is provided by this device.In addition, it has 8 pins.In addition to Display Drivers, it is also classified by its characteristics.The maximum efficiency can be achieved by operating it at a minimal voltage of 4.5V.This device is able to provide high efficiency when the maximal supply current should be less than 22mA.A load can be supplied with 500mA current.LED drivers in the Automotive, AEC-Q100 series are essential for a wide range of applications.There is no external factor that consumes current when there is 12mA current consumption.
TL4242TDRJRQ1 Features
Available in the 8-WDFN Exposed Pad package
Operating temperature of -40°C~105°C TA
Frequency of 10kHz
Supply voltage of 13.5V
TL4242TDRJRQ1 Applications
There are a lot of Texas Instruments TL4242TDRJRQ1 LED Driver ICs applications.
- Panel lighting
- LED Lighting PFCs, Linear Dimmable
- Dimmable LED for vehicle interiors
- LED Lightings for Industrial Equipment
- Constant Voltage Power Source for portable equipment
- A- lamps
- Refrigeration lighting
- Museum lighting
- Auxiliary lights for on-vehicle cameras
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
