TL3474IPWRE4 Overview
There is a TSSOP case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Tape & Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 14 mark. The total number of pins on linear amplifier is 14. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. It is possible to operate this buffer amplifier from a supply current of 3.5mA . 100dB should be the voltage gain. Op amp ic has 4 channels. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 105°C, Instrumentation amplifier should not be used. The operating supply voltage of the buffer op amp is rated at 18V. For the packing of the instrumentation amplifier, TR is adopted. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 4V. As a general rule, you should conduct this electronic component under dual supply voltages of 18V volts.
TL3474IPWRE4 Features
14 Pins
supply voltage of 15V
100dB voltage gain
TL3474IPWRE4 Applications
There are a lot of Texas Instruments
TL3474IPWRE4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
