TL3474IDG4 Overview
There is a D case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. 14 pins are located on the operational amplifiers. The input offset voltage is 1mV. The buffer amplifier is capable of operating from a supply current of 3.5mA . It is recommended to keep the voltage gain at 100dB at all times. On the buffer amps, there are 4 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 105°C. The operating supply voltage of the buffer op amp is rated at 18V. This linear amplifier pack is based on the TUBE axis. Under 36V is the minimum supply voltage for this electric component. Over 4V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V.
TL3474IDG4 Features
14 Pins
supply voltage of 15V
100dB voltage gain
TL3474IDG4 Applications
There are a lot of Texas Instruments
TL3474IDG4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
