TL2843DRE4 Overview
It comes in a 14-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 7.6V~30V. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller can be switched at Up to 500kHz. dc dc regulator is made easier with Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING REGULATOR signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 14 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "TL2843". 14 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 30V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. Voltage regulator dc to dc is designed to operate at 97 % duty cycle during power-ups and power-downs to ensure reliability. The switching controller works at a frequency of 500kHz. You can set the input voltage to 5.5V for nominal working status. The supply voltage should be 15V. You should not supply more current than 30mA to the controller.
TL2843DRE4 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %
Frequency: 500kHz
TL2843DRE4 Applications
There are a lot of Texas Instruments TL2843DRE4 DC to DC converter applications.
- Computer rooms
- Industrial robots
- Post equipment
- Automatic testing equipment
- ATMs
- Production lines
- Window air conditioners
- Linear guide
- Remotely powered electric motors
- Gear/thread machining machines
