TL082CDRE4 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. A J-FET-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 8 terminations over the past year. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 8 pins that make up the linear amplifier. The input offset voltage is 15mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . This op amp can operate from a supply current at 1.4mA. You should keep the voltage gain at 106.02dB for the time being. There is a rating of 2 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For packing the buffer amplifier, the TR-axis is adopted.
TL082CDRE4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL082CDRE4 Applications
There are a lot of Texas Instruments TL082CDRE4 Instrumentational OP Amps applications.
- Navigation
- Non-polarized electrodes
- E-book readers
- Signal transformation
- Broadcasting
- Cinema or auditorium audio system
- single/dual op amp sum and difference circuits
- High input resistance broadband
- Active probe
- Subtraction operation circuits
