TL081BCP Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. Op amps are J-FET types of amplifier on the chip. The op amp is delivered to you in a Tube case. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 3mV. This electrical part should be mounted using type Through Hole. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 1.4mA, this op amp ic can operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 18V.
TL081BCP Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL081BCP Applications
There are a lot of Texas Instruments TL081BCP Instrumentational OP Amps applications.
- Proportional operation circuits
- High/low-pass filter circuit
- single/dual op amp sum and difference circuits
- Laptop
- Weighing systems
- Navigation
- Automotive sensors
- Professional videography
- Image computer boards
- Power generator
