TL072MJG Overview
It is packaged in an CDIP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 6mV for input offset voltage. There should be no change in the voltage gain at 106.02dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -55°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. There are 2 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 18V, which is suitable. In order to conduct this part, you will need to provide dual supply voltages of 18V volts.
TL072MJG Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL072MJG Applications
There are a lot of Texas Instruments
TL072MJG Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
