TL064INSRG4 Overview
There is a SO case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are located on the operational amplifiers. The input offset voltage is 3mV. The buffer amplifier is capable of operating from a supply current of 200μA . It is recommended to keep the voltage gain at 75.56dB at all times. On the buffer amps, there are 4 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. The operating supply voltage of the buffer op amp is rated at 18V. This linear amplifier pack is based on the TAPE AND REEL axis. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V.
TL064INSRG4 Features
14 Pins
supply voltage of 15V
75.56dB voltage gain
TL064INSRG4 Applications
There are a lot of Texas Instruments
TL064INSRG4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
