TL064CDRG4 Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tape and Reel case. The number of terminations is approaching the 14 mark. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 14 pins. In terms of input offset voltage, operational amplifier rates 15mV. Operational amplifier can operate supply current at 200μA. You should keep the voltage gain at 75.56dB for the time being. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. You should only use instrumentation amplifier at temperatures that are no higher than 85°C. Op amp has total of 4 elements. The operating supply voltage of the buffer op amp is rated at 18V. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts.
TL064CDRG4 Features
14 Pins
supply voltage of 15V
75.56dB voltage gain
TL064CDRG4 Applications
There are a lot of Texas Instruments TL064CDRG4 Instrumentational OP Amps applications.
- Micro signal measurement
- Semiconductor detectors
- Signal operation
- ECG equipment
- Communication
- Television broadcasting equipment
- Polarized electrodes
- Signal amplification
- Displayers for aircraft and air transportation control systems
- Oscilloscopes
