TL061CPE4 Overview
The linear amplifier is packaged in a PDIP case which makes it easy for the consumer to handle. Op amps are OPERATIONAL AMPLIFIER types of amplifier on the chip. It comes in a Rail/Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 15V. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 15mV. You can run this op amp ic on 200μA . Op amp is a member of the 75.56dB's 75.56dB family. Using this buffer op amp requires a temperature of at least -40°C. It is recommended that op amp be used at temperatures below 85°C. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. There should be a dual supply voltage of 18V for you to conduct this electrical part.
TL061CPE4 Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
TL061CPE4 Applications
There are a lot of Texas Instruments
TL061CPE4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
