TL054AIDRE4 Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. A J-FET-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. A total of 14 terminations have been reported in the past few weeks. Linear amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 14-pin op amp ic is included in the package. The input offset voltage is 500μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . As long as the supply current of the chip does not exceed 8.4mA, this op amp ic can operate. You should keep the voltage gain at 97.15dB for the time being. There are 4 circuits on this op amp. The operating supply voltage of instrumentation amplifier is rated 15V voltage. The instrumentation amplifier is packed in the form of TR.
TL054AIDRE4 Features
14 Pins
supply voltage of 5V
97.15dB voltage gain
TL054AIDRE4 Applications
There are a lot of Texas Instruments TL054AIDRE4 Instrumentational OP Amps applications.
- Large motor controllers
- Signal amplification
- Image computer boards
- Hand-held batteries
- Medical instruments
- High/low-pass filter circuit
- Semiconductor detectors
- Radar
- Video data acquisition
- Oscilloscopes
