TIR1000IPWG4 Overview
In the 8-TSSOP (0.173, 4.40mm Width) package, the encoder is embedded.The encoder should be packed in a Tube case.Surface Mount is used for mounting this motor encoder.The type can be classified as Infrared Encoder/Decoder.A motor encoder from the TIR1000 family is used to create this motor encoder.The optical encoder provides switching power through its 2.7V~5.5V digital power.8 terminations are available in the optical encoder in order to meet your needs.By applying voltage to 2.7V~5.5V, the analog supply voltage can be applied.Total pin count on the rotary encoders is 8.As shown in the picture, Surface Mount mounts it.The encoder has 8 pins.Having the maximum 85°C ensures that the encoder reader runs smoothly and efficiently.The minimum working temperature of this rotary encoder must not be less than -40°C.The electronic rotary encoders is from Serial IO/Communication Controllers family.It is important to note that there are 1 bits on each encoder.In order for it to work, the minimum supply voltage must be 2.7V.There is a maximum supply voltage of 5.5V across the converter.This rotary encoder can also be used in order to establish CAN ALSO OPERATE AT 5V SUPPLY when using it.This quadrature encoder is able to handle a voltage of 3V as its power supply voltage.
TIR1000IPWG4 Features
In 8-TSSOP (0.173, 4.40mm Width) package
Mounting Type: Surface Mount
Base Part Number: TIR1000
8 pins
1 bits
TIR1000IPWG4 Applications
There are a lot of Texas Instruments TIR1000IPWG4 Encoders, Decoders, Converters applications.
- Remote Device Control
- Audio
- Camera for automotive
- PDAs
- Portable video projectors
- Video recorder
- Military
- Low power consumption
- Digital televisions
- Optical Networking
