THS7002IPWPG4 Overview
It is packaged in an HTSSOP EP-case that protects the operational amplifiers from damage. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 28 terminations this year. A total of 28 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Other Analog ICs op amp ic can be identified by the fact that this is a type of Other Analog ICs device. In total, the buffer amplifier consists of 28 pins. Op amp ic rates 5mV for input offset voltage. A supply current of 7mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 89dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 2 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 32V, which is suitable. Keeping the linear amplifier's supply voltage above 9V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 16V volts. It is important that the op amp resistance stays within the range of 1MOhm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.
THS7002IPWPG4 Features
28 Pins
supply voltage of 5V
89dB voltage gain
Resistance of 1MOhm
THS7002IPWPG4 Applications
There are a lot of Texas Instruments
THS7002IPWPG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
