THS4509RGTRG4 Overview
Packaging for the buffer amplifier is in the form of a VQFN case. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. There is a Tape and Reel case that is delivered with the instrumentation amplifiers. A total of 16 terminations have been reported in the past few weeks. Buffer amplifier has a total of 16 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.5V. An 16-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 4mV. Using a supply current of 37.7mA , this buffer op amp will be able to operate. Keeping the voltage gain at 68dB is the best course of action. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. You should not use op amp above 85°C degrees. A total of 1 elements are present in this linear amplifier. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.25V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 3V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 2.625V volts for this part. It is recommended to keep the buffer amps resistance within the range of 50kOhm.
THS4509RGTRG4 Features
16 Pins
supply voltage of 2.5V
68dB voltage gain
Resistance of 50kOhm
THS4509RGTRG4 Applications
There are a lot of Texas Instruments
THS4509RGTRG4 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
