THS4504DGNG4 Overview
In the package, you will find a HTSSOP EP-case to contain the op amp ic. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. A Rail/Tube case is used for delivering the op amp. The number of terminations approaches 8. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 7mV. You can run this op amp ic on 16mA . Maintain 54dB as the voltage gain. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. It is recommended that op amp be used at temperatures below 85°C. There is a rating of 1 for the operating supply voltage of the buffer op amp. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 15V, and this is an excellent feature. Keeping the linear amplifier's supply voltage above 4.5V is recommended. You should conduct this electronic component under the dual supply voltage of 7.5V. It is recommended to keep the instrumentation amplifier resistance within the range of 10MOhm.
THS4504DGNG4 Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 10MOhm
THS4504DGNG4 Applications
There are a lot of Texas Instruments THS4504DGNG4 Instrumentational OP Amps applications.
- Active probe
- High/low-pass filter circuit
- pH (acidity)
- Strain gauges
- earphone
- Voltage regulation circuit
- Subtraction operation circuits
- Scintillation detectors
- E-book readers
- High gain DC amplifier
