THS4502IDG4 Overview
There is a SOIC case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Rail/Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. It is possible to operate this buffer amplifier from a supply current of 23mA . 54dB should be the voltage gain. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 85°C, Instrumentation amplifier should not be used. There are 1 elements in total in this linear amplifier. The electrical part is capable of being powered by a voltage of under 15V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 4.5V. As a general rule, you should conduct this electronic component under dual supply voltages of 7.5V volts. 50kOhm is the range in which the op amp resistance should lie.
THS4502IDG4 Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 50kOhm
THS4502IDG4 Applications
There are a lot of Texas Instruments
THS4502IDG4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
