THS4130IDG4 Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 2mV for input offset voltage. A supply current of 12.3mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 78dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V. It is important to keep in mind that the power supply voltage of this electric component is below 30V, which is suitable. Keeping the linear amplifier's supply voltage above 5V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 16.5V volts. It is important that the op amp resistance stays within the range of 34MOhm.
THS4130IDG4 Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4130IDG4 Applications
There are a lot of Texas Instruments
THS4130IDG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
