THS4121CDGN Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. Buffer amps of this type are called Differential-types. Upon delivery, op amp ic is packaged in a Tube case. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 3.3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 8mV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. An 11mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 66dB. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3.3V. 820MOhm should be the range of resistance for the instrumentation amplifier.
THS4121CDGN Features
8 Pins
supply voltage of 3.3V
66dB voltage gain
Resistance of 820MOhm
THS4121CDGN Applications
There are a lot of Texas Instruments THS4121CDGN Instrumentational OP Amps applications.
- pH (acidity)
- Television broadcasting equipment
- Active probe
- Proportional operation circuits
- Integrator circuits
- Test and measurement instruments
- Image computer boards
- Logarithmic operation circuits
- Band-pass filter
- Voltage regulation circuit
