THS4062CDRG4 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called Voltage Feedback-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 8 pins on this chip. Op amp ic rates 8mV for input offset voltage. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. An 7.8mA volt supply current is needed for this linear amplifier to operate. 78.06dB should be the voltage gain. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. To pack the operational amplifier ics, TR is adopted as the packing method.
THS4062CDRG4 Features
8 Pins
supply voltage of 15V
78.06dB voltage gain
THS4062CDRG4 Applications
There are a lot of Texas Instruments THS4062CDRG4 Instrumentational OP Amps applications.
- Thermocouples
- Portable electronic products powered by batteries
- Tablets
- Weak signal detection
- High-frequency data acquisition systems
- Automatic control
- Power transmission
- ECG equipment
- Measurements of Wheatstone bridge
- Differentiator circuits
