THS4061IDGNR Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad-case to contain the op amp ic. Op amps are Voltage Feedback types of amplifier on the chip. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. There is an input offset voltage of 8mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using an 7.8mA supply current, this operational amplifier ics can be operated. 78.06dB should remain the voltage gain. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. For the packing of the instrumentation amplifier, TR is adopted.
THS4061IDGNR Features
8 Pins
supply voltage of 15V
78.06dB voltage gain
THS4061IDGNR Applications
There are a lot of Texas Instruments THS4061IDGNR Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Integrator circuits
- earphone
- Communication
- Measurements of Wheatstone bridge
- Proportional operation circuits
- Differentiator circuits
- Television broadcasting equipment
- Signal amplification
- Computer workstations
