THS4061CDGNG4 Overview
In the package, you will find a HTSSOP EP-case to contain the op amp ic. A Rail/Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. The op amp ic has an array of 8 pins on it. Op amp rates 8mV as input offset voltage. Using an 7.8mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 78.06dB for the time being. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than 0°C. A temperature greater than 70°C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. This electric component can work from a voltage of under 32V as far as supply voltage is concerned. A voltage of 9V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 16.5V volts when you conduct this part. Using the VIDEO AMPLIFIER column, it is possible to sort by the consumer IC type of the electronic ic chip. Refer to this op amp ic's additional benefit: IT CAN ALSO OPERATE WITH 9V TO 32V SINGLE SUPPLY.
THS4061CDGNG4 Features
8 Pins
78.06dB voltage gain
THS4061CDGNG4 Applications
There are a lot of Texas Instruments
THS4061CDGNG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
