THS4052CDRG4 Overview
Packaging for the buffer amplifier is in the form of a SOIC case. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. There is a Tape and Reel case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 10mV. Using a supply current of 8.5mA , this buffer op amp will be able to operate. Keeping the voltage gain at 75.56dB is the best course of action. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. You should not use op amp above 85°C degrees. A total of 2 elements are present in this linear amplifier. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 32V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 9V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 16.5V volts for this part.
THS4052CDRG4 Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
THS4052CDRG4 Applications
There are a lot of Texas Instruments
THS4052CDRG4 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
